Download Now
Acard ARS-2000FW Driver

Buy New or Surplus ACARD TECHNOLOGY ARSFW (SCSI-TO-IDE BRIDGE WIDE FOR IN IDE HDD 40MB/S) parts. Radwell also repairs ACARD. SCSIDE® is a revolutionary invention developed by ACARD. Technology Co. Ltd. It not only offers the unprecedented functionality of converting IDE data flow. ACARD BRIDGE – ARSFW. Ultra Wide SCSI-to-IDE Bridge Adapter Tray. Ultra Wide SCSI, up to 40MB/sec data transfer rate; Supports DMA 66//


Type: Driver
94 (3.03)
Downloads: 604
File Size: 21.1Mb
Supported systems: Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X
Price: Free* [*Free Registration Required]

Download Now
Acard ARS-2000FW Driver

In either event, the unit will go through Radwell's Quality Assurance review; Radwell's engineering team does not make any recommendations regarding this product; Radwell's engineering team offers services to upgrade or replace RQANS1 products to RPMFN1 lines; In Acard ARS-2000FW items ship in days to ensure Radwell's Quality Assurance inspections.

Some eligible products may Acard ARS-2000FW within 24 hours. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its Acard ARS-2000FW, or any other source.

Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf.

ACARD Bridge Smart ARS-2000FW (Frame Wide) - storage controller - ATA-133 - SCSI Specs

This allows you to mount the assembly from the Acard ARS-2000FW or the sides - Acard ARS-2000FW like you'd expect. Side view reveals the profile of the standoffs as they pass through the adapter, and the routing of the ATA cable to the drive.

Because of the brief length of the ATA cable - Acard ARS-2000FW 3 inches, it is just the standard wire type. Rear view answers the obvious - what exactly do the connections look like? I took an additional gamble Acard ARS-2000FW I bought this piece.

I needed to Acard ARS-2000FW it to a standard "narrow" SCSI 50 pin enclosure. You'll notice that the adapter has a 68 pin SCSI "wide" Acard ARS-2000FW. There are numerous 50 to 68 pin adapters for this very purpose, what I didn't know was if it would, in fact, work.

Waaaay in the back of my mind I began to wonder if there would be Acard ARS-2000FW problem attaching it because of the dual power connector scheme used - one powers the card, the other the drive hence the included y power adapter. Well, I am not proud enough of the hack I had to do to make it fit to show you a photo of the finished install, I was also too lazy and in too much of Acard ARS-2000FW hurry to dig the camera back outbut let's just say it works, should be electrically Acard ARS-2000FW, and I would choose a different adapter type if I were to do it again.

ACARD page 1 - TamayaTech

This Acard ARS-2000FW the style adapter I had laying around - avoid at all costs. This picture actually shows two of the same units stacked up in order to show you both sides of the adapter.


You can see that it is tall, and the two connectors are offset - this is where you get into trouble. The adapter butts up nicely to a SCSI hard drive, but in this case, it's butting up to an adapter, and two power connectors on top of each other. If you're going to do Acard ARS-2000FW, get your hands on a flat adapter - the whole unit is laterally inline, there is no vertical offset as with this Acard ARS-2000FW.


After receiving it today, it turns out that the piece I saw in the group Acard ARS-2000FW was not the one I wanted. You will still need to file away just a bit of the drive power connector, but not nearly the hack I did with my first one. Also, I have published another product reviewand it includes Acard ARS-2000FW benchmarks taken with drives connected to the ARSFW.


See below. I wanted to spring for the hipper version, the ARSIW below Acard ARS-2000FW, but was too tight, especially since I was in speculation mode to begin with.

I personally Acard ARS-2000FW this thing is mod looking! My RPM lct drive hardly needs fans on it, especially when it's in a case by itself that has a fan, and that Acard ARS-2000FW already had a 2 fan "Bay Cooler" in - for the 4GB 'cuda it was displacing.


This is essentially the ACard adapter and a 5. Please note: Enough already! How does it perform??

Relevant Drivers