Asus B85M-V PRO Intel AHCI/RAID Driver
This article provides a list of motherboard chipsets made by Intel, divided into three main .. Replaces AGP and CSA with PCI Express, and also supports "Matrix RAID", No support for external graphics cards (some boards, like Asus P5GZ-MX, . Expected G intended for Intel's vPro office computing brand, with GMA. There isn't an ASUS RAID tool or ASUS RAID controller as such, so you'll be working with an Intel or AMD utility, depending on whose chipset. Intel Rapid Storage Technology Driver - this is for some sort of RAID setup? .. Apparently, AHCI and RAID can be switched back and forth, and you could . review of ASUS, AsRock and Gigabyte, superceding their ASUS P8ZV-Pro .. Asus H81M-PLUS vs Gigabyte B85M-HD3 - LGA Micro-ATX.
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
Asus B85M-V PRO Intel AHCI/RAID Driver
Boot and security options Peripherals: Chipset and storage options Power Management: Power options OC: CPU and memory options Settings: Chipset, boot, and security options Hardware Monitor: System health and fan-speed options Adding to the confusion, the specific names for each setting may differ from one manufacturer to another.
This is the main system clock for the processor. If the motherboard supports changing this option, it provides is a universal way to overclock the processor, even if you don't have a processor that was marketed for it, such as Intel's non-K processors.
However, since this affects everything on the processor, including memory controller and integrated GPU, you normally can't tweak this value very high before stability issues start. CPU Ratio: This allows you to change the frequency multiplier of the processor. Normally, this only affects the cores themselves, and not the other parts of the processor, such as the memory controller or integrated GPU.
Changing this value is the easiest way to overclock. However, this is only supported on the following processors: Intel's K or X suffix processors e. As the name suggests, this option is used to spread the electromagnetic interference EMI coming off the processor across a broader range of frequencies. Asus B85M-V PRO Intel AHCI/RAID doesn't reduce the total amount of EMI, but it helps prevent all of it from being concentrated on the frequency of interest, namely the processor's clock frequency.
Sata Mode Selection; Aggressive Lpm Support - Asus MAXIMUS IX HERO Bios Manual [Page 46]
This should normally be left on, although if you're doing some serious overclocking, it may help with stability to turn it off. CPU Voltage: This is useful if you're overclocking, as higher clock speeds require higher voltages.
However, approach this setting gingerly. Even a relatively small change about 15 percent can fry the CPU.
Suspicious Activity Detected
And note that frying doesn't have to show any signs of physical damage to the part. As the name suggests, this is used for adjusting the processor's on-board PCI Express controller frequency. While it might be tempting to tweak this, thinking it could help with graphics, it won't actually do much for the graphics card.
It's best to leave this alone unless you've been touching BLCK, run into stability issues, and have run out of other options to tweak. Both options will adjust the clock frequency Asus B85M-V PRO Intel AHCI/RAID the processor to lower frequencies if it's not doing much and bump it back up to normal if it becomes busy. If you prefer to have your processor running at full speed all the time, disable this.
C-State Options: The C states denoted by C State are processor power levels. These are useful to turn off when attempting extreme overclocking to keep the processor from switching power states.
If your processor supports it, this will help virtual machines perform at near native level. On older machines, it'll be called "Vanderpool.
Sets the operating frequency of the memory. However, unlike BCLK on the processor, you can't chose an arbitrary frequency.
List of Intel chipsets - Wikipedia
Instead, you're left with options based on the BCLK multiplied by the memory's frequency multiplier. If you're left with strange frequencies after adjusting BCLK, it's best to pick the fastest one that isn't faster than the memory's rated spec.
For best results though, leave this on auto. Big list of timing values Higher-end motherboards will allow you to directly adjust the timing values of RAM; the list of these values is long.