Asrock P55 Pro/USB3 JMicron Driver
On this page, you can always free download ASRock P55 Pro/USB3 Realtek LAN driver for ASRock P55 Pro/USB3 JMicron SATA2 driver Type: ZIP Version. Thank you for purchasing ASRock P55 Pro/USB3 motherboard, a reliable .. JMicron. JMB ErP/EuP Ready. USB T: USB6. B: USB7. 5 Chapter 1: Introduction Thank you for purchasing ASRock P55 Pro/USB3 . RoHS Dr. Debug 1 JMicron JMB 1 SATAII_5_6 SATAII_3_4 SATAII_1_2.
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
Asrock P55 Pro/USB3 JMicron Driver
Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket: Step Carefully place purely vertical motion.
Download Asrock P55 Pro/USB3 JMicron SATA2 Driver for Vista Free Download
For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. This cap must be placed if returning the motherboard for after service. Insert the Pin CPU: Hold the CPU by the edge where is marked with black line. Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket Asrock P55 Pro/USB3 JMicron properly mated to the orient keys.
New chipset drivers for asrock p55 PRO/USB 3
Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.
Secure load lever with load plate tab under retention tab of load lever. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat.
Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact Asrock P55 Pro/USB3 JMicron each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPU. Apply thermal interface material onto center Asrock P55 Pro/USB3 JMicron IHS on the socket surface.
Apply Thermal Interface Material Step 2. Step 3. Place the heatsink onto the socket.
Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock.
Repeat with remaining fasteners. Fan cables on side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard.
ASRock P55 Pro/USB3 Realtek LAN driver download free (ver. 7017)
Step 5. Step 6.
Connect fan header with the CPU fan connector on the motherboard. Secure excess cable with tie-wrap Asrock P55 Pro/USB3 JMicron ensure cable does not interfere with fan operation or contact other components. Please be noticed that this motherboard supports Combo Cooler Option C.
Debian HCL - Asrock / p55 pro usb3
For dual channel configuration, you always need to Asrock P55 Pro/USB3 JMicron identical the same brand, speed, size and chiptype DDR3 DIMM pair in the slots of the same color. If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots of the same color.
Unlock a DIMM slot by pressing the retaining clips outward. PCI slots: PCIE slots: Installing an expansion card Step 1.
Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.